8 TIPS FOR PRESSURE WASHING TRUCKS AND OTHER SERVICE VEHICLES

A service vehicle is more than just a means of moving goods from one location to another. It’s also a mobile advertisement. Customers and clients associate the state of a company vehicle with the quality of the brand itself. Over time, road grime will inevitably build up on any company vehicle. If dirt is left on a company truck or van, customers may make negative connections with the brand. Therefore, it’s important to keep company automobiles in tip-top shape.

Fleet pressure washing is the best approach to keeping company cars and trucks clean. Pressure cleaning is effective, rapid and, assuming you choose an earth-friendly pressure washing service, safe for the planet. (Green pressure washing for trucks and cars involves sucking up water runoff before it can impact local watersheds, as well as using only earth-friendly cleaning supplies.) The tips listed below will help you achieve superior fleet pressure washing results – or, if you’re planning to hire a pressure washing service, they can act as quality checkpoints.

1. PRESOAK ESPECIALLY GREASY, FILTHY AREAS.

Some road grunge requires extra-strength cleaning supplies. For instance, sections that are covered in oil or grease should be presoaked in a degreasing solution. Areas under the hood and truck tend to pick up especially “sticky” grime, so be sure to presoak these zones.

2. USE A HIGH-POWERED PRESSURE WASHER.

Pressure washing for trucks and trailers requires a machine that can deliver at least 2,000 psi of water pressure.

3. BEGIN WITH AN OVERALL RINSE.

To begin, rinse the entire exterior of your truck or van. As a pressure washing service professional could tell you, this will go far toward removing dust from your vehicle’s exterior.

4. WORK IN SECTIONS, SPRAYING SOAP AND THEN RINSING WITH WATER.

Those who regularly provide pressure washing for trucks recommend tackling different sections at a time so you can clearly track what has been washed. Once soap has been applied, let each section sit for five to eight minutes. Avoid letting the surface of your truck or van dry completely, as this can cause streaking. As you wash, work from top to bottom, and be sure to rinse each section with generous amounts of clean water.

5. SELECT AN EARTH-FRIENDLY PRESSURE WASHING CHEMICAL.

Specialized pressure cleaning chemicals can make fleet pressure washing much easier. However, if you care about preserving the environment, you should know that not every pressure washing service uses earth-friendly cleaners. Why does this matter? Because non-biodegradable cleaners sweep into street drains, and from there into local streams and rivers, where they poison local species and disturb ecological balance.

6. DISPOSE OF WASTEWATER WISELY.

Another major environmental concern with pressure washing for trucks and other company vehicles is that the water runoff is highly hazardous for local water sources. If at all possible, you should capture your washing runoff to prevent oil, antifreeze and hundreds of other toxins from sweeping into nearby streams. (Or save yourself the hassle and hire a professional, earth-friendly pressure washing service.)

7. USE THE RIGHT PRESSURE WAND ATTACHMENTS.

Some companies employ large tractor trailer trucks for transporting goods across the country. Given their dimensions, these enormous vehicles can be especially difficult to clean – after all, few of us are tall enough to reach all the way to the roof of a semi-truck. A pressure cleaning attachment can solve this problem. Specifically, you’ll want to use a telescoping wand extension to add length to your pressure washer. It may be tempting to set up a ladder instead, but this is extremely dangerous because the pressure of the washer can easily knock a person off such precarious footing. For true pressure cleaning connoisseurs, a flex tubing extension will allow you to create a ninety-degree angle so as to reach easily underneath vehicles.

8. CONSIDER A PROFESSIONAL WASHING SERVICE.

Let’s face it – pressure washing for trucks and vans isn’t easy. If you’re unsure of the right pressure settings, you can cause permanent paint damage. And even if you have a perfect understanding of pressure cleaning, fleet pressure washing is physically demanding and time-consuming. A pressure washing service can usually save you money and time while delivering superb results.

Beyond creating a positive brand image, a clean truck is a safe truck. That’s because clean vehicles reflect more light, making it easier for drivers to spot your fleet. Furthermore, dirt-free automobiles are easier to maintain, since built-up soot, oil, dust and dirt tend to gunk up engine components. To see the full benefits of a clean fleet, pressure washing service professionals and amateurs alike should follow the suggestions listed above.

Leave a Reply

Your email address will not be published. Required fields are marked *