Business Profile Link on Alberta Métis Works

What is Alberta MétisWorks

Alberta MétisWorks is an online business directory of Métis owned and verified businesses. Developed by the Métis Nation of Alberta (MNA) as a tool to connect Métis businesses with procurement opportunities, and to allow Métis entrepreneurs to build relationships within their communities and across the province.

Our Values

  • Mission:

    Alberta MétisWorks aims to increase the visibility of Métis entrepreneurs, helping them build relationships within their communities, while connecting them to procurement opportunities across the province.

  • Values:

    Alberta MétisWorks aligns its strong values with the MNAs, which is to advance the socio-economic status and the cultural well-being of Métis people while building meaningful, long-term relationships with its community.

Check out our business profile on Alberta Métis Works where you can support aboriginal business’.

LINK HERE

COMMON PRESSURE WASHING MISTAKES

Pressure washing can be a huge time saver, and it can keep your home or commercial building looking its best. Unless, of course, you fall prey to one of the many types of damage a high-pressure jet of water can cause.

Here are some common power washing mistakes to avoid:

Pressure washing electrical outlets. Electricity and water don’t play well together. Accidental pressure washing can fry any electrical outlets located on the exterior of your building, which means it’s important to know where all of your outdoor outlets are before you turn on the power washer. You’d be surprised how often people don’t check their surroundings – and this goes for professionals as well as amateurs. Choose a pressure wash service that inspects your outlets before washing.

Using high pressure on a wood deck. Wood and water aren’t the best of friends, either. A lot of people use pressure washers for cleaning or stripping stain from their wood decks. Unfortunately, using too much pressure on a deck can destroy the boards and leave your deck looking ragged. Always use a low pressure setting on wood decking.

Using high pressure on vinyl siding. Pressure washing can also severely damage your vinyl siding, etching the side of your home with broad, graffiti-like marks. Additionally, a professional pressure wash service that uses hot water can cause vinyl siding to warp if the temperature is too high.

Pressure washing a roof. Roofing is another part of your home that should be cleaned with low pressure only. When done incorrectly, power washing can severely damage certain types of roofing, stripping the surface of the tiles or even causing shingles to lift.

Absentminded pressure washing. One careless swipe and mistake with the power washer can permanently mar your front door, tear up your screens, bust a window or cause other damage to your property. Always exercise caution when using a power washer, and choose a pressure washing company that does that same.

A BASIC GUIDE TO PSI LEVELS

PSI

Pressure washers are great for tackling tough cleaning jobs with a high-pressure blast of water using PSI. When pressure washing, however, it’s important to remember that turning the washer on full force isn’t always the way to go.

Using too much pressure on your deck, fence, siding or even concrete can result in permanent and unsightly damage, which is why it’s important to understand the psi on your pressure washer and how it works. Of course, when in doubt, it’s best to bring in a professional pressure wash service to ensure the job is done correctly.

WHAT PSI MEANS

PWHandle

Psi stands for pounds per square inch and measures how much water pressure your unit can produce. The higher the psi, the more cleaning power you have. Most pressure washers offer a psi range, allowing the operator to choose which pressure level best suits the task at hand, and even the cheapest models produce more than 20 times the pressure of a typical garden hose.

Pressure levels can range anywhere from 1,000 to 4,000 psi. When shopping for pressure washers, it’s best to choose a model that provides more psi than you think you’ll need, which will give you enough power to take care of extra-tricky stains and will prevent you from having to run your machine at full blast, which can wear it down over time.

Here’s a look at the basic psi levels recommended for common pressure washing jobs around the home or business:

1,000 to 1,500: The lowest pressure settings are best for pressure washing smaller surfaces such as charcoal grills, lawn furniture, bikes and cars, garden tools and other items that could be damaged by higher pressure.

1,500 to 2,000: This is the sweet spot for pressure washing decks, patios and siding, as higher pressure can gouge wood and other relatively soft surfaces, leaving ugly scars. However, when cleaning a wood deck or vinyl siding, remember that technique is as important as the psi setting; improper power washing technique can also leave blemishes, even if the correct psi is used. If you’ve got a tough deck job to do, hiring a pressure wash service may be the best way to protect your outdoor living space.

2,000 to 3,000: Larger areas such as driveways and walkways become much easier to clean when this psi range is used. Again, pay attention to your spraying technique; even concrete can sustain pressure washing damage if you’re not careful.

3,000 to 4,000: This psi range is where the heavy lifting happens. These settings are good for cleaning stripping paint and cleaning farm equipment, semi trailers and concrete. The high pressure can be dangerous, however, and is generally best left to a professional pressure wash service.

Contact us for professional Pressure Washing Services

HOW TO SAVE MONEY ON FLEET WASHING

Fleet washing can be an expensive and time-consuming proposition for many companies, especially if you have a lot of trucks or company vehicles. Yet is also essential for presenting a positive company image and ensuring safety as well as road-worthiness.

Fortunately, pressure washing for trucks is an efficient and cost-effective method of fleet washing that can ensure a thorough cleaning while minimizing down time. Here’s a look at how contracting with a pressure washing company can help you save on fleet washing costs:

NO CAPITAL INVESTMENT REQUIRED.

When a pressure washing professional takes care of your fleet cleaning needs, you can avoid having to shoulder expenses such as employee hourly wages; power washing equipment and maintenance; and regular chemical and water costs.

PRESSURE WASHING EXPERTS ARE MORE EFFICIENT.

Pressure washing companies can typically provide more efficient fleet washing than on-staff employees, they are experts who know how to effectively get the job done. They know what pitfalls to avoid and how to remove tough grime, such as graffiti. This means the task is completed more quickly, with less down time for your trucks.

 

TYPES OF PRESSURE WASHING NOZZLE

Any pressure wash service expert knows that matching the right nozzle to the job is important not only for efficient cleaning but to prevent damage to your property. During pressure washing, the amount of pressure that reaches the target partially depends on the size nozzle’s hole. Each job is different, so it’s a good idea to understand the differences between nozzles.

Here’s a quick guide to pressure washing nozzles:

Quick disconnect: Most of the tips you’ll encounter are designed for a quick disconnect. The plugs snap together quickly, so you’ll want to ensure that everything is on securely to keep your nozzle from flying off in the middle of your pressure washing job. The various types of quick disconnect nozzles are differentiated by the degree or pattern they create with the fan spray.

Quick Connect
Quick Connect

Pencil point: This nozzle creates a spray of zero degrees and has a red tip. It concentrates the pressure into a tiny area. It removes stains and substances caked onto tough surfaces, such as concrete sidewalks and steel equipment.

Red tip
Red tip

Chisel: This yellow-tipped pressure washer nozzle produces a fan of 15 degrees. Use it to remove substances that really stick to surfaces with bonds that are tough to remove, such as mildew and paint.

Yellow Tip
Yellow Tip

 

 

 

 

 

 

 

 

 

Wash: Boasting a green tip, this tip makes a spray of 25 degrees. The wash nozzle is best for plain, old washing. Choose this pressure washer nozzle to loosen weaker bonds as well as perform light tasks such as sweeping dirt and leaves off the sidewalk in front of your home or business.

Green Tip
Green tip

Rinse: The rinse nozzle yields a fan of 40 degrees and has a white tip. If you want to rinse windows or cars, this is the nozzle for you.

White TIp
White Tip

Turbo/rotary: One of the newest pressure washing accessories on the market, this nozzle is a multi-tasker. Also called the rotary , the rotary is used by your pressure wash service can finish that pressure washing job up to twice as quickly as with a regular nozzle. Rather than a fan-shaped spray pattern, turbo nozzles make a rotating circle, which ramps up your impact. The turbo nozzle works on almost any job, from mold to animal droppings to mud.

Rotary Tip
Rotary Tip

Soap Tip: These Tips are Black and they will dispense soap that is down-streamed from your pressure washer. Notice the large hole in the tip to allow for soap and suds to some through.

Soap Tip
Soap Tip

 

Regardless of which pressure washer one you choose, remember to check for signs of wear and have the nozzle replaced when appropriate. Remember when you are purchasing these tips you will have to make sure to check if they are 1/4 or 3/8 size. Make sure you get the correct size and PSI for the machine that you have. Buying a smaller tip and lower PSI then what your machine can produce will potentially bring on issues with tips exploding which could lead to bodily harm.

 

WHY DISTANCE MATTERS

The reason you’re pressure washing the graffiti off your fence or the mold off your siding is to improve the look of your home or business without causing additional damage or grime. But you don’t want to simply fire up the pressure washer, walk up to your property and start spraying away. There are many different factors that go into a pressure washing job. The distance between your pressure washer and the surface you’re cleaning is of critical importance. Here’s why:

Too close? Getting too close to the item you’re pressure washing could result in damage to the surface. The force of the water coming from the pressure washer is extremely high and can cause dents, tears or holes in the surface if you’re too close. This is especially true for wood items such as decks and fences as well as aluminum and vinyl siding.

Too far? If you’re too far away from the surface you’re pressure washing, all of your hard work will be ineffective. Your item might show marginal improvements in appearance, but it won’t get truly clean. Any cracks or divots in the surface might shield dirt and mold from the spray of the pressure washer.

Although finding the perfect distance involves some trial and error, the following starting distances have been professionally tested. Remember, when starting a pressure washing job, you should begin with the nozzle farther away and slowly bring it in to the proper distance. Choosing the correct pressure washing tip for the job is just as important.

  • Paint stripping: 2-12 inches
  • Concrete: 4-10 inches
  • Brick and mortar walls, patios, and walkways: 6-12 inches
  • Wooden decks and fences; asphalt: 8-18 inches
  • Vinyl siding; stucco: 12-24 inches
  • Cars and boats; pools and hot tubs; outdoor furniture: 18-24 inches

Do a few sweeps with the pressure washer, stop, and inspect the surface. Is it clean? If not, move a few inches closer. Repeat until you’ve found the perfect pressure washing distance that both cleans your item and keeps it intact.

Giving away our secrets you say! Not so much. Anyone can grab a pressure washer and start to clean. Does everyone know the correct chemicals that will not damage your metal roof or siding or even your patio? No. This is where we come in and get your job done. As an added bonus you get to take back YOUR time!

Not enough distance

 

Contact us to get the job done right!  

Professional Pressure Washing & Soft Washing Services

Professional Pressure Washing & Soft Washing Services

How much does it cost to Pressure Wash & Soft Wash?

When looking for professional Pressure washing services there are many different factors to take into account. Time, the asset being washed, Chemicals or no chemical used to break down grime.

Your Prices are too high! either we hear it or we don’t. When we don’t hear back from a customer we know that there are those situations where you just cant help. We hope that whoever they got to clean their stuff is a professional and does a great job.

When you take on a customer and quote a price for cleaning, most of the time you get what you pay for. The pictures below are from someone that could pressure wash it for cheaper. When they started they took $100 deposit did a little bit of work and bailed. Now that customer is out the $100 has a terrible looking driveway and they will have to spend the money to get someone to come in and do the job again. I would be pissed if I was paying and this was the result I got! Luckily we got you! we will make sure it gets done and if you are not satisfied, We will come back and make sure you are.

Don’t let your driveway look like this!

 

Contact us first and see what professional pressure washing & Soft washing can do for you

Our hourly rate is $100 per hour with a $150 minimum.

We have a few packages that have a reduced rate for a weekly and monthly rates with a 2 month commitment including Fleet washing & Garbage bin/ Grease bin services.

We also have reduced monthly and semi annual pricing for Solar including residential and commercial rates.

Even though we are based out of Thorhild. Our travel rates start at 53°32’45.7″N 113°29’38.0″W in Edmonton and work our way out for customers in the Greater Edmonton Area. For those that are closer to the Thorhild Area, Our starting point is the Thorhild Corner Store 54°09’31.2″N 113°07’26.6″W. For those in Fort McMurray, our starting point is 56°43’26.5″N 111°22’55.1″W. The travel rate is included in the $150 minimum. We will choose the closest Hub to your location. We use google maps to calculate the distances.

 

TOP 3 INDUSTRIES THAT BENEFIT FROM PROFESSIONAL POWER WASHING SERVICES

Most businesses can benefit from hiring a power washing company for exterior building and equipment cleaning. However, some industries need it more than others – particularly those that make use of heavy equipment or truck fleets that are prone to picking up heavy-duty grime.

Fleet washing and heavy equipment cleaning is essential in order to keep trucks and other equipment operating efficiently and safely. Clean trucks and machines help ensure the safety of operators and maintain a positive company image. Here’s a look at the top three industries that stand to benefit from hiring a power washing company for fleet washing or heavy equipment cleaning:

1. THE TRUCKING INDUSTRY

Trucks collect a lot of muck on the road, from dirt to exhaust to bug carcasses. They’re also the most visible part of a trucking company, which means they have a big impact on company image. A dirty fleet conveys an impression of sloppiness or carelessness, which can affect how other motorists view your drivers on the road.

Fleet washing doesn’t affect only image, however; it’s also a safety and maintenance issue. Trucks that receive regular fleet washing are more noticeable to motorists, which helps keep your drivers safe. Plus, fleet washing makes it easier for mechanics to spot and address maintenance issues during inspections.

2. THE RAIL INDUSTRY

In addition to the usual dust and dirt, rail cars are particularly prone to graffiti, which can require some major cleaning. Because most whole-unit trains consist of 125 cars, washing them all can quickly become a burdensome and expensive job. Plus, many railcars only get cleaned when they’re brought in for maintenance and repairs.

A quality power washing company that offers cost-effective mobile railcar cleaning – preferably one that can also apply an anti-graffiti coating – can make the job faster, easier and less expensive.

3. THE CONSTRUCTION INDUSTRY

Few vehicles pick up as much dirt and other gunk as the heavy equipment at a construction site. Too much grime can actually interfere with a machine’s ability to function, which means heavy equipment cleaning is essential to keeping a construction site running smoothly. Regular heavy equipment cleaning can also extend the life of equipment and help identify broken parts, fluid leaks and other maintenance issues.